Have you been hearing strange sounds at night that seem to come from your windows, but when you go to check, there is no one there? Now, here is the perfect solution to take your fears and worries away. You can learn how to replace that wired alarm window sensor that you have with a new and more reliable one. You don’t have to worry about the technicalities because I will discuss how to replace a wired alarm window sensor and the different types of alarm sensors you can choose from.
Types of Alarm Wired Alarm Window Sensor
There are different types of wired alarm window sensors that you need to know about before you can learn how to replace wired alarm window sensors if you want a different kind, then at least you already have an idea which one to go for.
Flush Mount Alarms
The first type of alarm is the flush mount alarm. It is attached to the bottom of the window frame, usually under the lower sash.
It is done mounted this way so that it can detect whenever the window gets opened. This type of alarm does not apply to all kinds of windows, especially if your window has a dam system.
Surface Mounted Alarms
This type of alarm is mounted on the surface of the window, which allows it to detect the window opening.
Glass Breakage Alarms
The next type of alarm works, as its name implies. It rings when the glass breaks. It is usually situated in the middle of the room, and it is designed to hear any glass breaking throughout the whole room.
Motion Detector Alarms
All you have to do is to get the best motion detector alarms and situate its sensors by or outside the windows. However, it would help if you were careful because some motion detector sensors are ultra-sensitive so that you might get false alarms.
Wireless Window Alarms
The last type of window alarm is the wireless window alarm, and it is one of the most sophisticated kinds of signals, and it can be mounted into the windows themselves.
When mounted into the middle of the window, it can sense the movement from the bottom to the top of the whole window.
How to Replace Wired Alarm Window Sensors
This time we will move on to learning how to replace wired alarm window sensors. Let us start by removing the old sensor.
Zone Programming Deletion
The first thing you have to do when learning to replace a wired alarm window sensor is to delete the zone programming. First, you have to know your system’s installer code for you to do this.
You will learn to delete the zone programming by reading the manual for your wired alarm window sensor.
Next, you have to disconnect the wired alarm sensor and remove its wires to make way for the new ones. You have to do this to both the sensor and the panel. Then, you can remove the whole sensor.
Remove the Magnets
The last step on how to replace wired alarm window sensors is to remove the magnets off the doors or the windows. Now, if your alarms are attached through an adhesive, then it is necessary to take the adhesives off of the window or the door because you won’t be able to install the new wired alarm sensor if they are in the way.
Furthermore, the magnets and adhesives can also be a nuisance if they are not removed.
Install the New Wired Alarm Window Sensor
Install the Sensors
When installing the sensors, follow the instructions that come with it since the procedure and the mechanics vary depending on the type of alarm.
You need to follow it period to period to ensure that the alarm works the way it is supposed to.
Connect the Wires
Next, you have to install the wirings and make sure that they follow the old wirings’ trail from your former window alarms. This way, it won’t be too difficult for you to line up the installations and to have them installed well.
Learning how to replace a wired alarm window sensor will come in handy in case the ones that you have are not working well for you anymore. We discussed how to replace the wired alarm window sensor and the different types of window sensors that you can choose from when deciding to replace the wired alarm sensor that you have. Know more about Motion Sensors.