How To Remove Safety First Cabinet Locks: Expert Hacks
Cabinet locks are usually intended to keep kids from opening the cabinets and reaching valuable or dangerous items. Most of these safety locks use a strong adhesive that can be difficult to remove. It will leave traces of the adhesive or destroy the fixture's pain if you can remove it. That is why you need to learn how to remove safety first cabinet lock and to prepare yourself for successfully removing it.
Different Kinds of Safety Cabinet Locking System
Cabinet locks aim to provide you with a safe home for your kids, especially for the curious toddlers. So, if you have young kids at home, you must prevent them from ransacking your cabinets. Also, these locks have a different locking system that you need to know, so you will be able to understand how to remove safety first cabinet lock.
- Locks with Adhesive Foams
This type of lock is the most common cabinet locks. Both ends of the device have adhesive that you have to stick to the doors of the cabinet. Applicable also to furniture with doors and appliances like refrigerators, oven, or microwave. The locking mechanism of this type is useful in locking your door cabinets. Adhesives stick firmly into the surface, making it hard for toddlers to pull. Most parents prefer this type because of ease of installation and easy for adults to use.
- Magnetic locks
This type of locks works by using a magnetic force in locking or unlocking the door cabinets. The latch is installed on the inside of the cabinet with screws. This is the one that holds to keep the doors closed. You can unlock it using a magnet that comes with the package when you bought the locks. To unlock this type of cabinet lock, you will simply place the magnet-based keys on the outside. Once you put it in the opposite outside, the magnet will release the lock allowing it to open. This locking system can be confusing for toddlers, and they will eventually give up when they can't figure out how to remove safety first cabinet lock.
- Sliding Locks
This type of locks is applicable for cabinets that use doorknobs or handles. This works when you hook the device to the cabinet handles and slide the bar until it becomes tight and can no longer be moved. The lock is usually made of plastic and thin enough to fit the knobs or handle. This lock type is most common for kitchen cabinets, where most doors have knobs and handles. Though the lock is visible to kids, the tightness of the lock will make them struggle to open its door. To unlock, you have to pinch the two buttons together using your fingers and slide it off.
- Tie Locks
This lock is the simplest. It looks like a shoelace but thicker. It has a lock that you can slide to tighten. To use, you need to insert the ribbon through the handles of the doors. The straightforward mechanism of this lock is suitable for people that do not like complications of safety locks.
Removing the Lock's Adhesive Tape Residue
The procedure on how to remove safety first cabinet lock can always be learned through the manual of the device. However, few things are still not discussed, like the total removal of the adhesive and getting rid of the residue. The adhesive is one of the tools used to stick the locking device into the cabinet doors easily.
Remove Adhesive Residue from Wood
When you have a wood cabinet, the adhesive foam might hold to it and can be hard to remove. So here are a few ways to remove the adhesive residue easily.
- Use wet clothes
One way to remove the adhesive is by using a wet cloth. You can add a small amount of detergent to clean thoroughly but do not over wet as it may damage the wood.
Heating is also one way to weakens the bond of the adhesive and the wood. You can use a blow dryer. While you point the dryer, you can use a knife to peel the adhesive's remaining material.
- Use Kitchen Product
Kitchen products like vinegar and vegetable oil can be a great help. Get a paper towel and soak it into vinegar or oil. Then press it to the area where the adhesive residue is located. Let it sit for 5 minutes, then gently peel as it loosens the stickiness.
- Use Commercial Glue-remover
There are glue removers available in the market that could remove the residue of the adhesive. Mostly of this product contains citrus oil. Make sure to follow the instruction written on the package.
While you must place cabinet locks for the safety of the small kids inside your home, you also need to learn how to remove the safety first cabinet lock. This is for you to remove the lock when its no longer needed or when it needs replacement. As the kids grow, your house will require different safety mechanisms. Knowing the how-tos of home security, including the removal of safety locks, is essential for your family’s security and safety. Know more about Cabinet Latches.
November 4, 2020
One way to stop the accidental opening of drawers or cabinet doors is to install latches such as safety hasps, barrel bolts, and childproof locks.
November 3, 2020
Babyproofing is for those few seconds that you don’t realize how those tiny little beings can be fast into darting towards the staircase, tries to get up on a table, how fast they can open doorknobs and get into rooms where they shouldn’t be allowed unattended.