How To Remove A Motion Sensor From Flood Light
Most of the time, burglars act at night when everyone is asleep. That is why most homeowners install security systems all over the house to make sure these intruders will not push through with their bad intentions. However, there are still some burglars who succeed in ransacking homes by managing to disable security systems. That is why you must put enough light around your house and into the yard. Floodlight would be the most suitable. But to keep the lights on, you must know how to remove motion sensor from flood light.
What is a Flood Light
Before knowing how to remove motion sensor from flood light, you must first know about flood lights. A floodlight is a form of light with a wide beam. You can see this type mostly in parking places, events, and outdoor playfields. You will also notice it on concerts lighting the stage. Since this gives a strong beam of light, homeowners used this to illuminate their backyards and keep intruders off the property.
This type of light has a sensor that detects movement. When there is motion within a certain range, the bulb will automatically turn on, lighting the area where it is pointed. Some floodlight also has a built-in camera that also records activities when the sensor is triggered. This is an ideal fixture to use when you feel like someone keeps roaming around your yard or spying. The lights will prevent them from getting into your property. However, if you want the light to illuminate all night, you must know how to remove motion sensor from flood light.
Disabling Motion Sensor from the Flood Light
Floodlights are best to keep your property secured. It is one way of scaring away intruders with the fear of being caught. But there are instances where you want to keep the floodlights on, either to light a night party or a night swimming. Sometimes, it is also irritating to see blinking lights when you have to be in that area.
Temporarily Turn Off the Motion Sensor
Manufacturers of floodlight have designed the light with buttons that are easy to understand and follow. So, before doing anything, check first if your floodlight has a button that says, "on time." This is usually located right below the sensor of the unit. In that case, you can switch it to any position except for the test position. It should disable the sensor temporarily. However, if it will not work, you can follow the below steps:
- Check your manual
From your manual, check whether your light has a dusk to dawn operation. This is the one responsible for the light to respond to motion during the night. If it has that operation, activate the light by triggering the sensor. Make a gesture for the sensor to detect motion and light up the floodlight.
- Place a lantern in front of the sensor.
Climb to the fixture using a ladder. Place it on the stable surface directly below the motion sensor to keep the lights on. To be safe, ask someone to help you hold the ladder. As you climb, make sure that the sensor detects your motion so that the light will not turn off. Once you are at the top of the ladder, ask someone to hand over the lantern and hang it directly in front of the sensor.
- Cover the motion sensor with electrical tape
Get a piece of electrical tape and place it over the motion sensor. This is for the light to stay on, and the sensor not to detect any motion.
- Set to manual override setting or Switch On/Off
Check your floodlight of it has a manual override setting. If so, switch it to that position. Otherwise, flip the switch button to off, then turn it back on. This makes the sensor stable and will not be able to detect motion anymore.
Permanently Turn Off the Motion Sensor
Before starting the work, place the newspaper right beneath the floodlight. Then place the ladder on top of it. The newspaper is for easy cleaning after you are done with the work. When everything is set, you can start disconnecting the power.
- Disconnecting the power source
Turn the lights off. Different floodlights have different configuration and set up. Most of them have an on/off switch. Others have an "auto" button while some have separate switcher but connected to the main panel. If your floodlight is battery operated, most of the time, it doesn't have the on/off switch. In this case, you can pull off the batteries.
- Disconnecting the sensor
After you have disconnected the power source, you can now remove the sensor's connection to the panel. In this stage, you should have fully understood how to remove motion sensor from flood light. The wires of the sensor are usually color-coded. Look for red, yellow, and black colored wires, and carefully remove the inputs on the panel.
Once you have done the three steps, you now reconnect the power, then turn it on. The sensor this time will not be able to detect motion, but the bulbs will still light up.
Floodlight is one of the lights that illuminate stadiums, outdoor game fields, and even concerts and outdoor parties. But over the years, it has become a popular fixture for added security to homeowners. Placing it to their lawn or backyard can be a great help to ensure no one will try to break in. This light has a motion sensor that once there is movement beneath it, the bulb will light up and scare away intruders. But if you decide to keep the lights on, you must learn how to remove motion sensor from flood light. Here's how to learn more about Motion Sensor Flood Lights.
January 4, 2021
Do you feel annoyed at times when you have to look for the light switch in the dark? What’s worse is when you have to go out of the house to throw the trash or go through a certain area where its pitch dark.
January 4, 2021
Installing a motion sensor floodlight to your home can make you feel safer and can give you peace of mind as your outdoor area will light up whenever someone approaches your house.