How To Remove An Alarm Sensor From A Door Frame
Of course, there will come a time that these many door alarm sensors will fail or get damaged, and there is the need to replace or remove them completely from the door frames. However, removing them is something you are not familiar with. This article will provide you a simple guide on how to remove alarm sensors from door frames with ease. Not only that, but you will also learn what is a door alarm sensor, its many variations, and its benefits.
Door Alarm Sensors
Door alarm sensors are simply motion detectors you install by your door or even windows. These sensors use a reed switch and magnet to connect to the door frame and to the door itself. The sensors go off if the two pieces are apart for more than two inches, triggering an alarm. It comes in various kinds and designs. Knowing what door alarm sensor you have will make it easy on how to remove the alarm sensor from the door frame.
Kinds of Door Sensors
Before we go to the step-by-step guide on how to remove alarm sensors from door frames, let us first learn the different door alarm sensors:
This kind of sensor is the most affordable and the most used door alarm sensor. You can install these using magnets to the door or window frames.
Recessed Contact Sensor
You can install the recessed contact sensor inside the frames of your door or windows. They are less likely visible to would-be burglars and intruders.
This third kind of door sensor comes in a thin design that makes it difficult to detect. These sensors come in designs that can easily blend with your home décor and make them less noticeable.
Benefits of Door Sensors
Of course, you need to review the benefits that door sensors provide its many users. Even if your door alarm fails, you can still replace it with a new one that can provide more lasting security! Here are the few benefits you can get by installing door alarm sensors:
Installing a door sensor to your doors will give you peace of mind since you know when intruders have barged in. Most door sensors even come with automated mobile alert systems that can notify you when someone breaks in when you are out of the house.
Having door sensors installed will also work as additional child protection because when your child opens the door, it will alert you immediately of the breach. This device allows you to prevent any harm to come to your child.
Lastly, installing door sensors works as prevention and deterrent from burglars or intruders. When they hear the alarm, they usually panic and leave the scene rather than carry on to steal inside.
Things you will Need
Before you remove your door alarm sensor, you need to prepare the necessary tools to make removal easy and convenient. Here are the things you need:
- An adhesive remover
- A narrow flathead screwdriver
- Paper towels
- A putty knife
- A screwdriver
- A soap
Removing the Alarm Sensor
So, how to remove alarm sensors from door frames, you ask? You will learn a simple guide in this matter that is easy and quick. Putting it in the wrong spot is not a cause for too much worry. Here is how you do it:
- Using your narrow flathead screwdriver, remove the cover of your reed switch by slightly twisting. Some door sensors use adhesive tapes for mounting. With this type of installation, you can slide your putty knife between the sensor panel and the door frame.
- Once the cover is open, it will usually set off the alarm. Make sure to encode your four-digit password.
- Then pull the batteries to remove the screws that hold the sensor in place to the door frame. Carefully remove the alarm sensor as well.
- Using a smaller screwdriver, remove the cover of the magnet piece of the sensor.
- Then, scrape off the adhesive residue from the door and clean it with your adhesive remover, soap, and water. Use the paper towel to dry the surface.
- Reinstall your new door alarm sensor to your designated spot.
There you have it! These are the steps on how to remove alarm sensors from door frames. Very easy and simple, right? Know more about Alarm Sensors.
Now you know how to remove alarm sensors from door frames. The only thing you must do now is to apply what you have learned about door alarm sensors. Just remember that there are different kinds of door alarm sensors and that it also has many benefits, especially added security and burglar deterrent.
Make sure to familiarize the steps on how to remove your alarm sensor and make sure no adhesive residue remains on the door frame. Knowing these simple instructions can give you a breather and replace old and failed door sensor alarms easily and quickly. So always keep these in mind.
February 9, 2021
When thieves steal from homes, they’re less likely to use the door as entry points, especially during daytime as the risk of getting caught is high.