How To Patch A Pool Safety Cover To Avoid Leaks
A pool safety cover is essential for swimming pool owners. However, overexposure to extreme sunlight may cause the cover to degrade over time, and with continuous usage, the damage is imminent. Luckily for you, those damages around your pool cover are repairable. In this article, I will discuss all possible ways on how to patch a pool safety cover and minimize the damage.
Types of Safety Covers
It is vital to know that not all safety covers have the same materials. I listed down the most basic materials that safety covers are usually made of. You must know this first before learning how to patch a pool safety cover. It has two covers, and these are:
Solid Safety Covers
Most safety covers are made with solid patches. They aren’t easily punctured, and when they are punctured, they don’t get worse easily, or the hole doesn’t widen easily. Most solid patched safety covers require solid patches to adhere to the material. It is best to patch it inside and out to secure both ends. Solids patches are great and durable kinds of material.
In most cases, there are specially designed patch kits to repair solid safety covers. They are quite cheap and can be bought in your local store or hardware.
Mesh Safety Covers
One of the most popular materials for safety covers is the mesh covers; they are pretty durable and can withstand harsh environments. They don’t puncture easily, and when they are punctured, they won’t fray easily nor expand instantly. Just like mesh covers, there are tons of variety of patches that mesh covers can adhere to. There are tons of options because mesh covers are the popular choice among safety covers.
Types of Patches
There are two options with regards to patching duties. You have to understand this so that it would be easier for you to know how to patch a pool safety cover. We’ll discuss it thoroughly below.
They are the best ones to patch any types of safety covers. They easily adhere to rips and punctures, as described above. Vinyl patches are also cheap and durable. Lucky for you, vinyl patch kits are available in your local store and hardware. Usually, vinyl patch kits contain a
DIY patches are only temporary fixes to your patching problems. They aren’t surefire fix to your rips and puncture. One good DIY patches to minimize leaking is duct tape. However, always remember that all of these are just temporary and must be replaced with a good adhesive immediately. Duct tapes are the conventional choice when Vinyl patches aren’t available in your local hardware or store.
Reasons Why You Should Get a Safety Pool Cover
Before we go directly on how to patch a safety pool cover, we must get a safety pool cover for our pools in the first place. Here are the possible reasons why you should get yourself a safety pool cover!
Slows Down Evaporation
As your pool water is exposed to direct sunlight, it will turn into vapor in no time. That’s why you need to cover your pool. You wouldn’t want to keep on putting water in your pool every day, right?
Keeps Out Environmental Clutters
If you imagine your pool without a cover, the chances are that once you wake up, your pool will be covered with lots of leaves, debris, and all sorts. Even worse, you could witness animals chiming in on your pool. It is a horrible sight to see, especially for owners.
Same with slowing down the evaporation, a covered pool is a good way to conserve water. A covered pool means you won’t be filling your pool as often as you need to. If it happens wherein you live in an area where water shortage is rampant, investing in a safety cover will do you wonders.
Helps Hold Heat
This is especially real for people living in a colder climate. Covering your pool at night reduces the chance of losing heat in the process. This only means that once you wake up, your pool is as warm as you would like. Who likes to dive right in knowing the pool is at freezing temperatures, right?
How to Patch A Pool Safety Cover
A small tear or a rip in your safety cover is an unsightly thing to witness. However, over the course, repairing those punctures and rips is made easy with patch kits. We’ll now discuss the basic steps on how to patch a safety pool cover.
Identifying the area of the patch is the first thing you must do once you’ve identified where the area that needs patching. Clean it thoroughly and make sure it is dry inside and out. For better patching, use alcohol to clean the area where patching is to be done.
Rips and punctures have loose threads and irregular materials hanging over. Carefully trim these areas so that the patch will easily adhere without any blunders.
Get your cover and lay it flat on the ground. Make sure the ground is clean and free of dust.
Obtain your patch and cut around the corners. Make sure that you give plenty of clearance. Make sure it is an inch larger than the patch in diameter.
You will need two patches. It is for the top and bottom. It is important to patch both sides to strengthen the cover further and reduce the risk of puncturing it.
Remove the backing strip with the adhesive patch and gently place it over the rips or puncture. Then slowly press the patch ones it is patched already. Always see to it that there are no air bubbles or wrinkles. And you are done. Congratulations!
Punctures and rips are a normal thing for pool owners. It is always good to be prepared at all times when that time arrives. If you know how to patch a pool safety cover effectively, then surely your pool would still look and work brand new. With our simple guidelines on knowing how to patch a safety pool cover, you are good to go. Find out more about Pool Safety Cover.