
DIY Security Systems
Automatic garage door openers allow easy and convenient access to your garage. It also ensures the security of your garage and home. However, if the power goes out, you may be thinking about how you can access it. Luckily, how to open garage door with no power is simple and easy. With just a few easy steps, you can open your garage in a breeze. Here are two ways on how to open garage door with no power.
Open the Door Manually
Unplug the automated garage door opener.
The first step on how to open garage door with no power is to unplug it. At the base of the trolley track located on the ceiling of your garage is your automatic garage door opener. To release the door from the automatic track, unplug the cord from the machine. In case the power comes back on, the automatic opener should not try to open the door while it’s disengaged, or else, it could make it difficult for you to reconnect the door back to the track.
Pull the emergency plug to disengage the door from the opener.
Find the red handle draping from a string on the trolley track above the door. Pull the handle straight down till you hear a “click.”
Grab the bottom of the garage door and lift it straight up.
When the automatic opener disengaged, manually open the garage door. Get a good grip and lift the door straight up, so it follows along the trolley track. Lift the door until it’s open all the way. If your door’s springs are in good condition, it will open easily and stay in place. However, if the door is difficult to open, call for professional help to service the door.
Don’t leave the door open and unattended.
Once you already know how to open garage door with no power, avoid leaving it open for too long. Even if your door is well-maintained or new, there are no devices to prevent it from slamming shut. So, to avoid the risk of injury, keep the door open only when you need to.
Slide the door to the floor to close it.
When you are ready to close your garage door, gently lower it until it firmly touches the ground. The weight of the door should be enough to keep it shut. Never slam or allow the garage door to fall on its own, since it could damage the track or the door.
Lock the garage door by engaging the manual lock.
The locking mechanism of your door isn’t active since the automatic opener doesn’t have any power. Most garage doors come with a metal lock located on the door, which you can engage to ensure that the door remains shut. Slide the metal bolt to the side to lock it in the rail of the track.
Reconnect the Opener
Close the garage door all the way.
When you’re ready to reconnect your automatic door opener, make sure it’s manually lowered and fully closed. There shouldn’t be any space between the bottom of the door and the ground. Leaving even just a small space can cause your automatic system to disintegrate.
Lower down the emergency cord towards the door opener.
You will see a switch at the end of the red emergency cord when it moves into place. You will also hear a “click” sound if the switch re-engages successfully.
Raise the door until it locks back into place.
After you’ve re-engaged the automatic door opener, reconnect the door with the trolley track. Try to raise the door about 1–2 feet (0.30–0.61 m) until it clicks back into place on the track.
Open and close the door fully to test it.
Once you’ve reconnected the garage door with the trolley track, open the door all the way. Check for any buckling or any noises that could indicate a problem with the connection. Afterward, close the door completely to make sure it’s functioning.
Conclusion
An automatic garage door opener gives you the convenience to open and close the door without having to do it manually. However, power may not be available all the time. So it is essential to know how to open garage door with no power. In this way, you are equipped no matter what the situation is. Find out more about Garage Doors.