How To Install Safety Rails In The Bathroom

Why we Need Safety Rails in Our Bathroom

Safety rails in the bathroom are useful for people who no longer have much strength in their bodies. These people are usually the elders in our family. If you want them to be safe and independent when taking a shower or toilet, a safety rail is handy. Also, there are those people who are in a wheelchair who can also use the safety rails. This can help strengthen their muscles and, at the same time, teach them how to be independent.

How to Install Safety Rails in Bathroom

If you want to be extra safe whenever you are using your bathroom, the DIY installation of safety rails is easy. As long as you have the right materials to use, then you are good to go. Here are some tips on how to install safety rails in bathroom:

• Know where to install.
  Find a spot in your bathroom where you think that it is needed the most. The usual place where you can install the safety rails is next to the toilet bowl and in the shower/bath area. Mark the areas with the use of a marker or duct tape. And it will be easier for you to visualize the installation of the safety rails. Make sure that the placement of the safety rails is easy to grab so that there will be no future accidents.
• Get the right tools.
  There are ready-made steels that you can use to install the rails in your bathroom. Just choose the one that fits perfectly in your bathroom so that you will no longer have to cut them. Be mindful of the diameter of the rails that you will be getting. Safety rails that are too thick are not suitable for people who have a weak grip. Also, get some heavy-duty bolts to secure the rails in their place. You will also need to have a drill to secure the screws.
• Clean the area
  Since you will be installing rails in your bathroom, be sure that it is clean before you start doing your job. A small amount of moisture and dirt may cause minor errors and damage to your rails. Also, check for rust on your railings. Making sure that the bathroom is clean and dry before installing the safety railing will help prevent any damage or hassle during the installation.
• Start measuring
  Once you have all of the right materials and tools, you can start measuring the rails to where you want them to install. Always use a permanent marker to mark the measurements. Have an assistant with you to hold the steel railing so that it will be easier for you to mark and drill the holes and the screws. Always check if the measurements are right. You don’t want to have a bathroom railing that is too long or too short. If you’re wondering how to install grab bars in a tile shower, all you need is to have an assistant to help you to hold the safety rail and slowly measure and drill the tile using the right drill bits.
• Install
  Installing can be dusty, so be sure to have a mask and a pair of industrial goggles to protect yourself. Start by drilling the marked areas where the heavy-duty screws are supposed to be. And once everything mark has a hole in it, you can place the steel rail and have the screws installed to secure the bathroom rail.
  
  Once everything is in its place, check if the safety rails are secured so that you will no longer have to worry about it falling. Try pulling it in different ways and check the screws. If there are small movements of the screws, you have to place a washer between the screw and the safety rail. But it doesn’t move, and then it is good to go.

Who Benefits from the Safety Rails in the Bathroom?

If there’s a person with a disability in your household that requires assistance whenever they are walking or when using the bathroom, you must have safety rails in the bathroom. How to install safety rails in bathroom takes a lot of effort. But it will be worth it because your loved one can use the toilet safely and comfortably. You will no longer have to worry about them slipping on the wet floor if they are on their own. Find out more about Safety Rails.