How To Install Outdoor Motion Sensing Security Lights

How Do Outdoor Motion Sensing Security Light Works?

Motion sensors are tiny portable eyes that identify infrared waves — heat waves radiating from objects in motion. When the detector senses an object moves through its angle of vision, it switches on the lights. Based on how you customize the device, the motion sensor light remains anywhere from 1 to 20 minutes. The detector then switches off the light immediately until it fails to feel motion.

A motion sensor illumination has a circular viewing angle of up to 240 degrees and a range scale that can be calibrated on most devices, reaching up to 70 feet or longer. An outdoor motion sensor light can respond to your dog’s gestures, an approaching human, a moving vehicle, or also wind-blown leaves at times. Finding a perfect spot works best if you know how to install outdoor motion sensing security light.

Things to Consider for Installation

Major inconvenience ‘trips’ like leaves or a speeding vehicle will trick the sensor into switching on the light when you might not want them. However, by changing the distance-range configuration and carefully tuning the device to restrict its viewing angle, you can overcome unnecessary light switch-on.

By adding tape to the device, you can narrow the range of vision even further. If you are concerned with disturbance trips, be sure to place a light within a removable angle/range and a targeted detector system.

An outdoor motion sensor light enables you to control the lighting in a traditional, manual fashion. You can turn on the light of the motion sensor off for a second, then back on. Understanding how to install outdoor motion sensing security light helps you to have a motion sensor lights on at night when you want to. You go back to full motion detection illumination by double switching a second time.

Where to Place Motion Sensing Security Lights

Place a motion detector light to support the walks leading up over your front and back doors and the porch for the best efficiency. That way, when people arrive home at night, the lights will show up on.

Place the motion sensor lights to protect all entrances to your property, like fence windows and darkened parts of your yard, if increased protection is concerned. Good lighting can not guarantee safety, but it is one of the best low-cost ways to get intruders to move away. It’s critical to know where and how to install outdoor motion sensing security lights.

It’s best to mount motion-sensing lights 6 to 10ft above the ground and position it across the tolerance zone rather than towards the detector. One workaround is to purchase a remote motion detector unit that you can mount to a particular location from the glow itself. Use low voltage wires to hook them up to the light, so you wouldn’t have to encapsulate them in plastic or metal conduit.

How to Install Outdoor Motion Sensing Security Lights

Switch Off the Light 

Although most outdoor motion sensor lighting is placed instead of an existing porch light, you need to start the project by removing the existing light. You need to go to the electrical panel in your house to hit the lamp to switch off the power. 

Remove the Wire

There are three different wires connected to the lighting tube. You can see a white cable (the neutral wire), a green or copper wire (the ground wire), and a black or red wire (the hot wire). After checking, disconnect all three wires from the existing light to ensure they do not receive any power.

Install the Adjustable Crosspiece onto the Electrical Box from the Lighting Kit

The motion detector light package that you purchase should come with a tiny crosspiece brace with many different openings, enabling you to mount it to multiple sizes of light fittings. Queue up the panel as per the mounted electrical device and lock the bracket into position.

Position the rubber gasket along the outside edge of the current fixture, which comes with the light.

A rubber gasket holds securely the bottom of the light in which it sticks to the wall with the new lightbox. Slide down this gasket into the lamp and position over the cable. It doesn’t have to be precisely aligned; you only need the gasket before attaching the cord on the lamp to the electrical pole, or you’ll have to detach everything.

Attach the Cabling to a Wire Cap

You have to ensure the wiring is fully installed. That indicates the neutral (white) cables and the hot (black/red) wires are connected. To support the tie, use a wiring cap on the attached wires and use adhesive tape along the edge of the wire cap to secure it in position.

Screw the Lights On

When you have the setup in order, you can tighten the bulbs that have come with it. If you don’t like what your light comes with, you can also pick a specific form of the lamp. 

Seal the Light Fixture

You may want to secure the light fixture where it connects to the base plate once you have restored the electricity to ensure it works. Using a silicone caulk across the case as it stands on the board. It should also ensure that there is no dust in the case.

Turn the Light Back to the Fixture

Now you’ve installed the bulb, and you are ready to test it. The first step you must do is switch on the breaker panel and restore the control to the fixture.

Set a Time Frame

In addition to the sensitivity setting, most motion-sensing lights have a time setting, which helps determine how long the beam stays on when the detector trips it. This setup is a transition that modifies the increase in total, so set it to your preferences.