
Safety lockers are one of the most reliable storage solutions for valuables across the globe. They are mini vaults that have coded or biometric locks that you can affix or install in preferably hidden areas of your home. In this article, I will discuss how to fix safety lockers at home and the most strategic areas for installing them. You are about to have a firm grasp as to how you can keep your valuables safe from intruders or even for your family.
Fixing Safety Lockers at Home
When learning how to fix safety lockers at home, you first need to know the types of safety cabinets because the steps on how to set safety lockers at home can vary depending on the nature of the safety locker that you want to install.
How to Fix Safety Lockers at Home: Underfloor
The first type of home safe that you need to learn about when learning how to fix safety lockers at home is the underfloor home.
The underfloor home safe is a steel box that has a door with a coded lock on top. The body of this type of safe will offer optimum protection for your valuables. And, the top of the safe or the door can be opened through a combination of codes.
You can install this type of home safe into wooden floorboards but, it is advised to fit them into concrete floors.
Check Your Tools
The first thing you need to do when learning how to fix safety lockers at home is to check the tools that you need.
- Jackhammer,
- Weldmesh,
- Concrete
Your Location
Look for a location to install the safe. The area needs to be a solid floor, and it needs to have enough space on both sides so that the cover or the lid can be opened correctly.
Next, you need to make sure that the place or the location is strategic enough that it can be hidden well. Also, you have to make sure that you will know how to protect your safe by covering it with furniture, making it hard to find for people who do not know the whole house.
Prepare the Area
Next, you need to prepare the area where you want to fix the safe.
- Draw the safe’s body like its measurements on the area where you want to install the safe.
- Leave an extra width of four inches or more on each side to a lot of allowance for the installation.
- Break the concrete along the markings using a jackhammer.
- Dig deeper using a shovel.
- To avoid moisture, you need to line the hole with plastic sheeting or any waterproof sealant.
Install the Safe
The last step will complete learning how to fix safety lockers at home, and that is installing the underfloor home safely.
- Pour a small foundation of concrete into the deeper area of the marking.
- Gently lower the safe into the hole.
- Make sure that the safe is in the right place and position.
- Fill the rest of the hole with concrete by gradually pouring it into the hole.
- Use a stick to stir the concrete.
- Use a trowel to smooth the concrete.
How to Fix Safety Lockers at Home: Floorboard
Next, when learning how to fix safety lockers at home, you need to learn how to install a floorboard home safe. A floorboard home safe can be fixed within an hour or two, depending on who installs it. Find out more about Safety Lockers.
Prepare the Tools
To start learning how to fix safety lockers at home, always remember that the first step is to prepare your tools and make sure that you have everything that you need.
- Pencil
- Saw
- Drill
- Shovel,
- Trowel, and
- Plastic sheeting
Location
A floorboard safe needs a specific area. It needs a sturdy floorboard that, if you cut away a section, won’t sag. Also, you need to make sure that the floorboards do not have any wiring or piping.
And next, you need to install it in a safe place, somewhere hidden and where it won’t be seen easily. Also, make sure that the safe’s dial is facing you once it is set in place.
Prepare the Area
- Outline the safe on the floorboards.
- Leave extra four inches around the outline that you drew.
- Drill a hole
- Sew along with the marks that you drew.
- Draw the hole deeper than the safe’s actual height.
- Line the hole with a waterproof sealant.
Fix the Safe
- Pour a small foundation of concrete.
- Wait for it to set.
- Gently lower the safe into the hole.
- Fill the rest of the hole.
- Wait for it to dry
- Remove the excess concrete from the floor.
How to Fix Safety Lockers at Home: Wall
You will need to learn how to fix a safety locker into a wall at home. Just like the floorboard safety locker, you can have this installed in an hour.
Prepare Tools
- Screwdriver,
- Pencil
- Tape measure
- Stud finder
- Screws
- Drywall saw
Location
Wall-mounted safety lockers are practical safes. However, they are more challenging to install. You need to look for a wall area that is strong and reliable, ideally drywall, with an ample gap between vertical supports.
You also need to consider if the area has wirings or piping and make sure that the area can be covered by paintings, furniture, or any other objects to hide the safe.
Prepare the Area
- Find a wall stud using the stud locator.
- Locate the vast and empty space between two studs
- Use the drywall saw to cut the opening between the two studs.
- You can fill the opening with plywood strips.
Install the Safe
- Open the door of the safe
- Insert it into the opening
- Have a second person to hold the safe in place
- Fill in any gaps with plywood shaving
Conclusion
Learning how to fix safety lockers at home is essential if you are planning to keep a safety locker because this is the best way to keep it hidden. In this article, I discussed how you could fix safety lockers in different areas of your home. All you have to do is choose the best area for installing the safety lockers and then follow the instructions. Also, make sure to pick the best-hidden area for your safety locker.