Many homes have security systems to prevent potential criminal activity and to keep out those who do not know the code. Nevertheless, in rare instances, you may need to get outside your home without setting off the alarm. Many different alarm systems are available, and each one will be unique. However, for standard magnet and button alarm systems, or even a camera security system, there are some ways on how to disable window alarm sensors to sneak by undetected.
How to Disable Magnet Sensors
- Identify your escape route.
Magnet sensors are the most common alarms usually located on the windows and doors. Choose a door or window that’s clear to access and escape through. For windows, also examine your path after you exit. Second story windows can be challenging to get down from without ladder safely. Thus, these windows should be avoided. The best choice is to choose a window that’s on the ground level. - Inspect the alarm to verify it’s magnetic.
Usually, magnet sensors look like a small metal box. Most of the time, they may have exposed pieces of magnet, which are typically dark in color. The magnetic sensor has two parts: the stationary and the movable part of your door or window. When the magnetic connection between the stationary and movable parts of the sensor is broken, the alarm will set off. Most magnet sensors are placed on the door or window frame, and they can be at the top, bottom, or side. However, some magnetic sensors are impossible to bypass because they are located inside the door jamb and the door. - Use a standard magnet to bypass the sensor.
Be careful when attempting how to disable window alarm sensors since some sensors have higher quality than others, so this may not always work. In some cases, you may be able to utilize a fridge magnet to trick the sensor into deeming the door or window is closed even when otherwise. For sophisticated magnet sensors, you may use a screwdriver to remove the movable part of the sensor on the door or window. You may then place it onto the stationary part to make it think the window is still closed. Before removing any part of the sensor, take a picture of it first with your cell phone. It will serve as a reference photo if you need to put it back together later. - Return the door or window to normal.
After you come back, you’ll want to enable your alarm again to prevent housebreakers from using your temporary escape path. To do this, restore your door or window to the fully closed position and get rid of the magnet you used to cheat the sensor. For a more sophisticated system, remove the movable part of the sensor and refasten that part into place. If you have trouble remembering how to reinstall the device, consult the picture you took earlier.
Disabling Button Alarms
- Plan your exit point.
Button alarms are also common for windows and doors. Choose an easily accessible exit point, like one that is free of clutter and opens effortlessly. For windows, you should prioritize chest highs, as these will pose less of any risk for falling injuries. Falling from a second-story window or higher could cause severe injury or even death. - Familiarize the alarm mechanism.
Push-button alarms will frequently have a thin, plastic casing that has a built-in button. Upon opening a door or window, the button will be released, triggering the alarm. Some button sensors utilize a casing that contours itself so that the sides form a cradle for your door or window. You can often locate the button for the alarm in the center of this cradle. - Obstruct the button.
Place an object over the button to keep it engaged, fooling your button alarm into thinking that the window or door is still locked. One way on how to disable window alarm sensors is to open the door or window in tiny increments. Once the button is visible, but still engaged, use a Popsicle stick to hold the button down, keeping the alarm from setting off. You can also use sturdy card stock for sensitive alarms. Wiggle it in the space between the button and the door or window to keep the button in place. - Fasten your button blocker.
To prevent an alarm after you leave, fasten your button blocker in place to stop it from activating. Typically, you can use a durable tape, like duct tape, to hold your button blocker down and keep it pressed. For a more permanent disabling measure, you may opt to glue your button blocker in place. But, doing so will make this entry point vulnerable to burglars as well. - Remove the obstruction when the alarm is disengaged.
Your button blocker may be evident on your window, so remove it after you’re done on how to disable window alarm sensors. Removing your blocker while the alarm is engaged may result in setting it off, so wait until the alarm is off before you withdraw your blocker.
Conclusion
How to disable window alarm sensors can be useful, especially when you need to go out without setting off the alarm and waking up your entire household. The procedures may differ depending on the type of sensor you have. But generally, the steps are very easy to follow. Always remember to use caution when dis-engaging your window alarm sensors. Doing so will make your home vulnerable to burglars and thieves. So unless it’s a matter of life and death, we recommend that you use the front door when leaving your home. Know more about Alarm Sensors.