How To Disable A Window Alarm: 4 Easy Steps
Most homes have security systems to keep the bad guys out. Some households even use alarm sensors to monitor entry points, such as the living room, the bedroom, or even the windows. However, if you want to open your windows to get the cool breeze flow in your bedroom during hot summer nights, for instance, you may need to disable that specific window sensor to keep the alarms off. Through this, you will still protect your home and get that nice summer breeze. To help you, here are some steps on how to disable a window alarm.
Easy Steps on How to Disable a Window Alarm
The first step on how to disable a window alarm is that you must enter the password that was entered into the control panel so that the whole home alarm gives you access to the menu commands. Navigate over the menu that will allow you to deactivate the window sensor to be disabled. Deselect or remove the checkmark next to the window sensor that's on the "Input" menu. Rearm the system by keying in the password again.
Proceed to the window where the attached sensor is located. Open the window and unhitch the sensor pad that can be found at the bottom of the window with the use of a Phillips screwdriver. Keep the sensor pad to the side.
Using the Philip's screwdriver, loosen up the screws that can be seen on the side of the sensor-receiving plate on the windowsill. Unravel the wires around each screw.
The last step on how to disable a window alarm is to remove the wood screws that hold the sensor-receiving plate on the windowsill using a Philips screwdriver. Pull off the plate from the windowsill and place it inside, then close the window. Here's how to learn more about Window Alarms
Disabling a Sensor
Let’s say you want to make use of your alarm system, but you have a window or door, or a general area that you want to work differently, but you still want to arm the rest of the alarm system. There are various reasons why you might want to learn how to disable a window alarm:
- You might want to be able to open and close a particular window at night while your alarm system is armed.
- You might want to bypass a certain motion alarm sensor so that a person or a pet can move freely in an area without setting off the alarm.
- While you are having repairs or renovations at your home, the sensor may be momentarily dismissed – but you still desire to use your alarm system to protect the rest of the house.
The Importance of Monitored Security Systems
Bypassing a sensor may seem like the best step for you and your family to take when construction or renovation is happening in individual parts of your home. This is also necessary if you're holding a party in the backyard, and you wish to leave everything but your backdoor alarm deactivated. However, deactivating or disarming even single door security can impair your home’s overall system.
This is where monitored security comes in. It will provide you and your family around-the-clock protection. With a monitored system, you usually sign a contract and pay a monthly fee to have somebody watch your back 24/7. While with an unmonitored or self-monitored system, you are responsible for calling help should the need arises. There's also a “do-it-yourself” or DIY home security, that refers to self-installed and monitored systems and no contract systems which provide monitoring without a contract.
Having a home security system is a vital part of the safety of home living. It protects you, your family, and your property. Having this device in your home will give you that peaceful night's sleep without worrying about unwanted guests. However, there may be times when you'd want to purposely disable or bypass a specific alarm system area for some reason - say a window. Then, knowing how to disable a window alarm is necessary not to impair the whole security system at your home. Always remember, proper home security is the key to living peacefully.