How To Change LED Security Light Bulbs Correctly
If you know the steps on how to change led security light bulb, then you do not need to hire a professional electrician to do it for you because doing it on your own can save you money. In this article, you will learn how to change LED security light bulbs the right way to make sure they work and avoid accidents.
The Ways on How to Change LED Security Light Bulbs
There are two ways on how to change LED security bulbs:
- You can change the bulb or change the entire light system.
- You can replace most standard LED security lights with an LED R7 bulb, which should pop into the existing fitting like a normal replacement with several sizes to choose from.
Depending on the existing bulb that you use, let say you are using incandescent or halogen bulb. Replacing it with LED bulbs can be more beneficial. LED bulb brings better light performance with low energy consumption. Therefore it’s more efficient. It comes in different hues of white and warm light and lasts a lot longer than a regular bulb.
Security lights are often installed to illuminate the pathway, porch, and lawn and serve as a deterrent to those who want to enter your house. But over a stretched period of using the light, the bulb gets burn out, that’s when it needed replacement. The next question is how to change LED security light bulbs.
Remember that security lights are not built like ordinary home lights because they usually come with a certain type of fixture. Working on the fixture should be carefully done first before you can proceed with changing the bulb.
The fitting or bulb base is the part that fits into the holder of the lighting device. Some bulbs have a screw thread that allows you to screw the bulb into the bulb holder (e.g., E27). Other bulbs have two little pins (e.g., GU10), where you have to give the bulb a quarter turn to fix it in the holder.
Aside from that, some security lights have motion sensors and don’t have an off switch. So, while you’re changing the bulb, it may suddenly lit up and blind you. To avoid any accident, we must follow a few important steps on how to change the outdoor light bulb.
The Steps on How to Change LED Security Light Bulbs
- Switch off the power.
- Remove the light bulb cover.
- Take out the burned-out bulb.
- Unscrew the fixture that is holding the light using a screwdriver.
- Pull out the entire fixture and clean off any electrical tape found in the wires inside.
- Get your new fixture and put it on the base where it is originally placed.
- Screw the new fixture in its place and put a new bulb in the bulb cover.
- If the bulb cover is damaged, replace the bulb cover as well.
- If your lights have a sensor, test out the light by moving close to it before activating the motion sensor.
Take note that lights with motion sensors work differently compared to lights without. That is why you also need to approach lights with motion sensors differently.
The Tips on How to Change LED Security Light Bulbs
Also, take note of the few tips on how to replace motion sensor bulbs:
Turn Off the Power at the Fuse
We mentioned that there is no off switch for lights with motion sensors. That said, you still need to find a way to shut off the security lights for safety reasons completely. To fully turn off the light, shut it down at the main fuse itself. Be careful in finding the right circuit; otherwise, you might shut down the electricity of other parts of your home.
Use a Cloth to Touch the Bulb
Consider this as a standard safety practice that you should do when handling any light bulb. Human skin naturally secretes oil, especially when you sweat. These oils can sometimes heat the motion sensor light too much to the point that it may burst. To be on the safe side, it is always important to use a cloth when changing lights or maybe wear a pair of gloves. This ensures that no liquid from the body will drop to the bulb.
Adjust the Light Sensitivity
Most motion sensors have a sensitivity setting. While you are changing the bulb, you might want to work on the sensitivity settings as well. You can experiment on which settings you like best. The most sensitive configuration will detect even the slightest movement. This type is best for security purposes.
If this guide is safely followed, changing LED security light bulbs would be easy. You can do it anytime. All you must do is buy the right replacement parts and follow these simple steps on how to change LED security light bulbs. You can be the perfect handyman around your home once you master the steps.