How To Change The Battery In Smoke Detectors

DIY Security Systems

House fires are dangerous and can cause severe damages. Many casualties occur during fires at night. It often happens in places that either don’t own a smoke detector or have a non-functional one installed. Regular smoke detector maintenance can cut the chances of dying in a house fire significantly. Sometimes, forgetting to replace old batteries can mean a life or death situation. If you want to learn how to change battery in smoke detector, this article is what you need.

Replacing the Battery for Non-wired Detectors

• Check battery type.
  Installing the new batteries wrongly, or using the incorrect type, will cause your smoke detector to malfunction. Always make sure you are using the right type of battery when completing how to change the battery in smoke detector precisely to make sure that the sensor will operate. Use high-quality and long-lasting batteries since low-quality ones may cause your detectors to fail. Some detectors use lithium batteries that last for ten years. However, you cannot replace the battery; instead, replace the smoke alarm after its ten-year life span. 
• Remove the smoke detector. 
  Take your smoke detector down from its mounting. If your sensor is hard-wired into your house’s power system, you should first turn it off at the fuse box. The process you use to remove your smoke detector from its mounting will depend on its model. Most smoke detectors can be twisted or slid away from their mounting. On the other hand, some models require that you only remove the section covering the internal components and battery.
• Open the battery compartment and install the new battery.
  How to change the battery in smoke detector requires you to locate the battery, and remove the cover that contains it. The exact location of the batteries and how secured it is will differ from model to model. Usually, once you remove the detector’s cover, you will be able to access the battery without trouble. Most covers will slide off easily from the smoke detector’s body. Always make sure you install the new batteries correctly. Check your manual if you are having trouble locating or removing your device’s batteries. 
• Test the batteries.
  Before you reinstall the detector, make sure that the batteries are working correctly. Locate and utilize the button on your smoke detector to test the batteries. The test button location depends on your device’s type and model. If successful, the smoke detector will sound.
• If the test fails, double-check.
  If the alarm doesn’t sound during the battery test, you will need to recheck them. Don’t reinstall your smoke alarm until it passes the battery test and has shown that it is functioning properly. Make sure that the batteries are installed correctly. Some smoke alarms have a LED-light feature that will indicate if it is working properly. Generally, a green light indicates good working conditions, while a red light indicates a possible issue.
• Review your smoke detector’s user manual.
  Review the information in your instruction manual to help you better understand how to change the battery in smoke detector and properly maintain its functionality. The manual also indicates which type of battery is needed for your smoke detector. Keep your manual in a safe and accessible place you can easily reach when necessary.