
DIY Security Systems
Switching from a baby crib to a kid’s bed is like graduation for children. Once you have made the switch, chances are you need to attach a toddler bed rails on their bed to keep them safe while they are sleeping. It is not that hard, though. Just keep in mind safety at home. Learning how to attach toddler bed rails can be fun and exciting, especially for parents.
Parents can use toddler bed rails to protect babies from entering restricted areas of their homes. They can be used to monitor children while they are playing with their toys or even just sleeping. Most importantly, attaching and securing toddler bed rails ensures that they would not fall off from their beds while they are asleep.
The Reasons Why You Should Get Toddler Bed Rails
Getting your babies the best toddler bed rails is one way of taking care and keeping them safe. Before we dive in the right direction on how to attach toddler bed rails, it is important why parents should install their kid’s bed with toddler bed rails in the first place. Here are some of the main reasons why you should get bed rails for your baby:
Fall Prevention
It is one of the key reasons why parents should get their babies with toddler rails. Babies are at risk of falling off their beds, especially during their toddler years. Toddler bed rails can provide a huge amount of protection to your babies. It lets you know your baby is safe because you installed a toddler bed rail.
Comfort and Security
The feeling of comfort, knowing that there is a wall protecting you from falling, gives babies the chance to be at peace and doze their way off until they are fully awake. The feeling of comfort that they can sleep in any area of the bed without the fear of falling. Not only they provide safety but comfort as well. That’s why parents should emphasize providing rails for their children.
These are all essential reasons why you must get your baby a toddler rail. Also, it provides plenty of comfort for parents, knowing that their babies are safe and sound.
How to Use Toddler Bed Rails
As I’ve mentioned earlier, a toddler bed rail protects you and your baby from falling out of the bed. Transitioning from crib to a bed rail may not be as easy as you think. It needs a lot of consideration for your baby to transition from crib to a kid’s bed. An adequately installed bed rail is an effective way to transition your kid from crib to a normal bed. It would also be better if you know how to use and how to attach toddler bed rails on your own.
When choosing the right bed rails, as with any product, it is important to prioritize your child’s safety. As a rule of thumb, especially for parents, the small the baby is, the stricter should the precautions be when choosing the right bed rail for your kid and installing it.
The main risk of installing toddler bed rails is the fear of your baby getting stuck between the mattress and the rails, which can be deadly to a little. But also, in the latter age, you may want to provide rails to ensure no injuries and unnecessary awakenings during night time.
How to Attach Toddler Bed Rails
We can now go directly to the main part: how to attach toddler bed rails. Remember that these are just the basic attachments that are most often used in basic bed rails. Always remember that each rail may differ from one another depending on the brand. The steps are as follows:
Step 1
The first step is always removing the kid’s mattress from the bed itself. Removing the mattress exposes the bed slats. Basic toddler beds often use crib mattresses and don’t use a box spring.
Step 2
Get your rails and position them atop of the wooden bed slates. Double-check that the outside part of the rails sits against inside of the side rail. Leave a few inches between the headboard and bed rails. This gives your kid enough space for your kids to leave in and out of the bed while still giving them plenty of fall protection.
Step 3
On top of the bed slats, make sure that your Bed rails are centered. I must be in between the headboard and the footboard. Place 4-inch corner braces along the bed slats, or in some cases, L-shaped brackets. Make sure that they are already centered. When they are centered, trace all the markings needed before you drill the holes for your screws.
Step 4
Get your bed rails and place it on a stable work area. Carefully line up the brackets before drilling. Line the screw holes up and with the markings that you did on the bed rails. Use a wireless screwdriver equipped in a Philipps bit to punch the wood screw holes provided with the brackets onto the legs of the bed rails.
Step 5
Relocate the toddler bed rails on the bed slats. Arrange the marks on the slats with the holes in the braces. Connect the remaining bed rails to the slates with screws that will support the rail.
Step 6
If applicable, repeat these steps when attaching bed rails to the other side of the bed.
Conclusion
A toddler bed rail can offer one of the best protection to children while they are asleep. Transitioning from baby crib to a kid’s bed may be a milestone, but always remember that they are still young and fragile. You, as a parent, should provide plenty of protection and safety precautions. If you know how to attach toddler bed rails, you will further be able to provide the best for your children while winning the best mom or dad award. Here’s how to learn more about Toddler Bed Rails.