
Motion sensors are a good choice to keep your home safe. They are good at alerting you when someone has arrived at your property as a guest or an intruder, and they are also good additional lights when you come home. However, if you are reading this, you are concerned about how to adjust motion sensor flood lights.
To optimize the use of your motion sensors, you need to ensure that your motion sensors are set up correctly. It should be placed in areas where it can get a lot of coverage and should be away from trees, plants, or other things that might block its detecting mechanism.
The Best Practices for Mounting Sensors
If you are not confident about your installation skills, it would be best to hire a professional for you. If you have had the installation done before this project with the help of manuals or the company’s customer service, you would not be much of a hassle.
However, you have to bear in mind that motion sensors, regardless of how perfect they are being advertised, are not error-proof; and there are instances where they can send false alarms. Normally false alarms are mostly caused by but are not limited to faulty equipment, lightning, poor application engineering, power surges, user error, and electrical failures. Sometimes it can also be triggered by foliage, animals, and insects.
To prevent false alarm reads and to increase the effectiveness of your sensors. This material is written under the assumption that you already have ample knowledge of the different types of motion sensors. Since most households prefer to use PIR sensors, this will specifically focus on it. But it will include generic guidelines that are commonly applied in most sensors.
Here are some of the best practices that you can implore on how to adjust motion sensor flood lights:
Place Your PIR Sensors 10-15 Feet Away from Where the Flood Usually Starts
Since you wanted to know if your area is flooded initially, you need to place your motion sensor flood lights in areas where the flood would usually start or where the puddle of water usually forms before it floods. By doing so, you would know what type of adjustments you can make in your property to avoid such.
Identify Your Property “Chokepoints”
Chokepoints are areas where most people pass by. In this case, since you are not after human motions, but flood, your chokepoints are those where water rose very fast during rainy days. Once you identify tour choke points, you would know how to adjust motion sensor flood lights to give you the proper alarm.
Asses Where Most Waters Accumulate and Which Area Do They Usually Pass
As mentioned earlier, it is important to identify the areas in your property where water can get it in and accumulate in your party and where it easily rises. By doing so, you can adjust your sensor flood lights according to the need of an alarm.
How to Install Your Motion Sensors Floodlights
Most motion sensors today are wireless, and the installation of these sensors has become standards making DIY install very easy. So if you happen to own a screwdriver and know how to use it, you do the job in no time. Correct installation can always provide you the best coverage and avoid false alarms.
Unbox
Unboxing is the main step you could do, especially when looking at how to adjust motion sensor floodlights. Knowing what’s inside the package is very important. You should lay out all the materials to have an idea as to how to install it.
Identify Your Location
To be able to have an efficient alarm from your motion sensors, you need to place it in areas where you can detect the motions you wish to be informed about. If you happen to be working with a professional, make sure to guide him of where you need to have your sensors installed. By doing so, this would avoid your sensors from picking false readings.
Install Your Sensor
You can mount it if needed. The installation would depend mainly on the type of motions you would like to get. If your sensors can pan and get a wider coverage or range, you can mount it higher. Otherwise, install it in a height that would serve you best.
Connect Your Sensor to Your System
Now that you know how to install and how to adjust motion sensor flood lights, the next thing that you need to do next is to make sure that your sensor can send you alarms on platforms you prefer. Today, an application needs to be installed once your sensors are up and running to get updates on your mobile phones.
Set Your Motion Detection Settings
In your case, you have to see to it that you set it to inform you if there is a possibility that your property will be flooded.
Main Your Motion Detector
For your system to last, maintenance plays a very important role. Keeping your motion detector fee from dust and what cannot prolong its usefulness can provide the best result for you.
Conclusion
A flood is not something that you can experience daily, but it is one of the most destructive causes, especially during rainy days. Installation of motion sensors can help you prepare to keep your family safe. Your knowledge of how to adjust motion sensor flood lights can help you set your system in areas where you can detect water gushes and give you the most efficient readings. Find out more about Motion Sensor Flood Lights.