DIY Security Systems
With cameras getting smaller by the year and audio devices becoming easier to hide, being secure with your privacy is no longer considered paranoia. The opportunistic thief will find a way to infiltrate your personal and sensitive information, especially when you are a person of influence. One way to stop intruders from accessing vital information is by routinely using a bug detector. How do bug detectors work? We will learn about a bug detector, its many uses, and its primary application in this article.
What Is A Bug Detector?
The bug detector is pretty much similar to a radio frequency device. It detects frequency being transmitted over the area by electronic devices. In this case, the bug detector will detect a surveillance camera or an audio device that sends and receives frequency. The bug detector will light up if it detects a frequency in the area or let you know through its dial system.
Frequency Variations
The bug detector comes in different frequency variations. An awareness of these frequencies is key to understanding correctly how do bug detectors work in your favor. When purchasing a bug detector, you will be presented with different frequency ranges to capture precisely the frequency of the electrical devices you are looking for.
We will site a few examples of common electrical gadgets and their frequency so you can gauge the frequency variation you will be purchasing.
- Base Band Audio – has a frequency of 300 Hz to 15 kHz
- Ultrasonic Audio – has a frequency 10 kHz to 150 kHz
- Video Cameras and Tape Recorders – have a frequency of around 20 kHz and 350 kHz.
Some frequency transmitting devices also come in a combination of these three frequencies.
- UHF Antenna’s – transmits 15% video, 15% data and 60% voice has a frequency of 300 Mhz to 900 MHz
- Ultraviolet and Infrared devices – transmit a frequency of 150 nm to 700 nm.
How To Use A Bug Detector
Now that we have tackled the key points of how do bug detectors work and how to choose them, it’s time to apply them in real life. When using a bug detector, it is essential to perform some ordinary tasks first. This is to narrow down our options to be successful in our search for electrical recording devices.
- Visual Inspection
Before grabbing the bug detector, it is critical to do a quick search and scan of the area using your senses. In this case, the sense of sight and touch will be crucial in your search. When presented with a situation, like an unknown hotel room, you can have a quick inspection of the room. Look out for possible places like cracks and holes that a recording device can be hidden into. Use your hands to touch and go under tables, chairs, and beds. After your search, you can proceed to the next task. - Switch Off Devices
The bug detector acts as a frequency receiver, so all devices in the area aren’t exempted. A laptop, smartphone, and even the TV can emit frequencies that may disrupt your bug detectors feed. There are also smart appliances that can be a nuisance to your search, like the smart refrigerator and smart lights. These devices will show up during your frequency scan and will only waste your time if you don’t turn them off. So turn off these devices and proceed to the last step. - Bug Detector Inspection
Now that we have performed the necessary check-ups, we can truly know how do bug detectors work. Get the bug detector, turn it on, and make sure that it is pointed in the right direction or front of you. As mentioned earlier, the frequency emitted by a video camera, audio recorder, infrared cameras, and UHD sounds will trigger your bug detector, usually flickering its dial or signaling its light indicator.
Recording devices that are common in the market have a frequency between 10 MHz and 8 GHz. As you move closer to a device, the bug detectors signal will let you know that you are near. Depending on your bug detector, a high pitched sound is emitted usually in intervals, when it detects a frequency. As you move closer to the device, and when the high pitch sound is in one tune, the device is in front of you.
To have a thorough search of the room, check every corner. You can check drawers, storage spaces and lockers as well as in between walls. There are also hidden spy cameras that may have frequency blockers and are hidden to resemble common objects like a picture frame or vase. There is also a possibility that recording devices are planted on you, so check your clothes and bags as well.
Record Your Data
If you do find something or nothing at all, record your data every time. Take note of the different frequencies that you have registered and be familiar with those devices that transmit it. The more you practice the habit of using a bug detector, the more accurate your search will be. Because we are looking for hidden objects, persistence is critical, so don’t give up the quest easily.
Conclusion
The bug detector’s components may be complicated, but knowing exactly how bug detectors work is fairly easy. Operating the bug detector is not that hard to do because you only need to turn it on, point, and observe. In a world where recording devices are cheap and abundant, you have nothing to be ashamed about when you want to take extra precautions.
A persistent thief or con-artist will go above and beyond to retrieve sensitive data. So investing in the necessary security is crucial to your home safety and own privacy. The bug detector is only one of many things you can do to protect your personal and essential information. Find out more about Smart Light Bulbs.